User manual

COMMUNICATION INTERFACE
125
F-45 = 128
Subnet Mask part 3 of 4
F-46 = 0
Subnet Mask part 4 of 4
F-43 = 172
Gateway part 1 of 4
F-44 = 16
Gateway part 2 of 4
F-45 = 21
Gateway part 3 of 4
F-46 = 101
Gateway part 4 of 4
F-57 = 1
Enable Sockets
Note
The socket function is only available for firmware
version V1.12 or above. See page 92 to check your
firmware version number.
USB Remote Control Function Check
Functionality
check
Invoke a terminal application such as MTTTY
(Multi-Threaded TTY).
To check the COM port No, see the Device
Manager in the PC. For WinXP; Control panel
→ System → Hardware tab.
Run this query command via the terminal after
the instrument has been configured for USB
remote control (page 121).
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version
in the following format.
 XXXXXX,AAAAAA,TW123456,01.00.2011010
1
Manufacturer: XXXXXX
Model number : AAAAAA
Serial number : TW123456
Firmware version : 01.00.20110101