User Manual

Section 2: General operation Series 2200 Programmable DC Power Supplies Reference Manual
2-20 2200S-901-01 Rev. A/November 2011
Recall the power supply ON/OFF output state at power on
The Output Recall control determines the On or Off output state after the power supply is powered
on. If you select On, the power supply will restore the state of the output to that which was in use
before the power was last turned off. If the output was turned on when the power supply is turned off
or loses power then the output will return to the On state when the power supply is turned back on or
power is restored. Selecting Off will disable this function and the output channel will always be set to
Off after the power supply is powered on.
To enable or disable this control:
1. Press the Shift and Menu (1) to access the configuration menus.
2. Use the up and down arrow keys to select >User.
3. Press Enter.
4. Use the up and down arrow keys to select >Output Recall.
5. Press Enter.
6. Use the up or down arrow keys to select >On or >Off.
7. Press Enter.
8. Press Esc to exit the menu system.
Wait 3 seconds after changing the settings to allow the settings to be completely stored before
powering off the instrument.
The default value for the Output Recall control is Off.