Datasheet

ManualsBrandsKEITHLEY ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) 2200 0 - 32 Vdc 0 - 3 A

DC POWER SUPPLIES

www.keithley.com

1.888.KEITHLEY

(U.S. only)

A Greater Measure of Conﬁdence

Series 2200

Single-Channel Programmable

DC Power Supplies

The Series 2200 Single-Channel Programmable DC Power Supplies provide

a wide range of voltage outputs to address the testing and characteriza-

tion of components, circuits, modules, and complete devices, whether you

are in a research laboratory, in design and development, or in production

test. The Series 2200 consists of five models with output voltages from

20V to 72V that can deliver 86W, 96W, 100W, and 150W of power. In addi-

tion, these power supplies can act as constant current sources as well as

constant voltage sources. The Series 2200 power supplies offer an excellent

combination of performance, versatility, and ease of use that allow you to

obtain quality test data as quickly as possible. They perform as effectively

in automated test systems as they do in manual instrument configurations.

Outstanding Accuracy Delivered to the Load

With basic voltage setting accuracy of 0.03% and basic voltage readback

accuracy of 0.02%, you can be sure that the voltage you program for the

load is applied at the output terminals. What’s more, the rear panel con-

nections include remote sense terminals that compensate for voltage drops

in the power supply leads. This helps to ensure that the correct voltage is delivered to the load termi-

nals of the device-under-test (DUT). Great accuracy is not limited to voltage—the basic current setting

and readback accuracy is 0.05%, providing you with high quality load current measurements. Also,

with less than 5mVp-p noise, you can be confident that the power applied to the DUT’s load termi-

nals is both accurate and of high quality.

Superior resolution is also provided by Keithley’s Series 2200 single-channel power supplies. With

1mV and 0.1mA resolution, the effects of very small changes in voltage and current can be detected

and studied. For portable devices in which minimum power consumption is critical, the 0.1mA cur-

rent resolution allows you to measure the idle and sleep mode currents so you can verify that your

products meet aggressive low power consumption goals.

Get Test Results Quickly

Keithley’s Series 2200 single-channel power supplies have a number of features that enable you to

obtain the results you need quickly and easily, including tools to help you create sophisticated tests

for a wide range of requirements.

The dual-line display shows both the programmed settings and the actual voltage and current out-

puts, allowing you to immediately see, understand, and address any differences between the expect-

ed and actual output values. Multiple methods can be used to adjust the voltage and current settings.

You can use the direct-entry numeric keypad to set precise voltage and current values. There is also a

rotary knob with adjustable step size that lets you easily study the response of your DUT to small or

large changes in voltage or current.

Need to repeat a set of tests often? Instead of programming a number of parameters for each test

every time you run the test, just use a few keystrokes to save a test setup once and then recall it

whenever you need it. Take advantage of 40 memory locations to save up to 40 set ups or use the

Series 2200 List mode to define custom test sequences of up to 80 steps. This makes it easy to per-

form tests such as analyzing how your circuit- or device-under-test performs at each voltage level

within a range of voltages. A saved test can be run manually using front panel key strokes, automati-

cally using external trigger signals, or remotely using programmable interface commands. Up to

seven 80-step lists can be stored in a Series 2200 single-channel power supply. Each step can have a

programmable duration.

Protects Your DUT at All Times

A number of features are built into the Series 2200 power supplies to ensure that your DUT is pro-

tected from damage. A maximum voltage can be set so that regardless of the voltage value requested,

the output will not exceed the programmed limit value. For further voltage magnitude protection, an

Over Voltage protection level can be programmed that will cause the output to drop below 1V if the

Over Voltage limit is reached. These protections are in addition to the Current Limit setting, which

restricts the amount of current that can flow into the DUT. If the Current Limit is reached, the Series

• Five models ranging in power

from 86W to 150W with voltage

outputs from 20V to 72V

address a wide range of power

requirements

• 0.03% basic voltage output

accuracy and 0.05% basic

current accuracy provide

quality test data

• High output and measurement

resolution, 1mV and 0.1mA,

for testing low power circuits

and devices

• Remote sensing to ensure the

programmed voltage is applied

to the load

• Dual-line display shows both

the programmed values and

actual outputs for a continuous

indication of the status of the

power delivered to the load

• Repeatable test sequences

of up to 80 output steps are

easy to create with the built-in

List mode

• GPIB and USB interfaces

are standard for convenient

automated control

Single-channel programmable DC power supplies

Summary of content (4 pages)

PAGE 1
The Series 2200 Single-Channel Programmable DC Power Supplies provide a wide range of voltage outputs to address the testing and characterization of components, circuits, modules, and complete devices, whether you are in a research laboratory, in design and development, or in production test. The Series 2200 consists of five models with output voltages from 20V to 72V that can deliver 86W, 96W, 100W, and 150W of power.
PAGE 2
200-20-5 Programmable DC Power Supply, 20V, 5A 2200-30-5 Programmable DC Power Supply, 30V, 5A 2200-32-3 Programmable DC Power Supply, 32V, 3A 2200-60-2 Programmable DC Power Supply, 60V, 2.5A 2200-72-1 Programmable DC Power Supply, 72V, 1.
PAGE 3
Series 2200 2200-30-5 2200-32-3 2200-60-2 2200-72-1 MAXIMUM POWER 0 to 20 V 0 to 5 A 100 W 0 to 30 V 0 to 5 A 150 W 0 to 32 V 0 to 3 A 96 W 0 to 60 V 0 to 2.5 A 150 W 0 to 72 V 0 to 1.2 A 86 W LOAD REGULATION Voltage Current <0.01% + 2 mV <0.05% + 0.1 mA <0.01% + 2 mV <0.05% + 1.5 mA <0.01% + 2 mV <0.05% + 0.1 mA <0.01% + 2 mV <0.05% + 0.5 mA <0.01% + 2 mV <0.05% + 0.5 mA LINE REGULATION Voltage Current < 0.01% + 1 mV <0.05% + 0.1 mA <0.01% + 1 mV <0.05% + 0.1 mA <0.01% + 1 mV <0.
PAGE 4
Series 2200 Single-Channel Programmable DC Power Supplies EMC: European Union: EN 55011, Class A; IEC 61000-3-2; IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11. USA: FCC, CFR Title 47, Part 15, Subpart B, Class A. Australia: EMC Framework, demonstrated per Emission Standard AS/NZS 2064 (industrial, scientific, and medical equipment). Safety: European Union: Low voltage directive 2006/95/EC; EN61010-1 2001.