User manual

Recall
Perform the following steps to view stored readings and buffer statistics:
1. Press RECALL. The BUFFER annunciator turns on to indicate that stored readings are
being displayed. The arrow annunciator () also turns on to indicate that additional data
is available for viewing.
2. As shown in Figure 6-1, use the RANGE and keys, and the cursor and keys
to navigate through the reading numbers, reading values, and buffer statistics. For any of
the buffer statistics (maximum, minimum, peak-to-peak, average, standard deviation),
the STAT annunciator is on.
3. To return to the normal display, press EXIT.
Figure 6-1
Buffer locations
RDG NO. 10 Reading Value
RDG NO. 9 Reading Value
RDG NO. 8 Reading Value
RDG NO. 7 Reading Value
RDG NO. 6 Reading Value
RDG NO. 5 Reading Value
RDG NO. 4 Reading Value
RDG NO. 3 Reading Value
RDG NO. 2 Reading Value
RDG NO. 1 Reading Value
STD DEV Standard Deviation Value
Average Average Value
Peak-toPeak Peak-to-Peak Value
Min At XX Minimum Value
Max At XX Maximum Value
RANGE
RANGE
Buffer 6-3