User manual

KI-Tool And KI-Link Software User's Manual Section 4: KI-
Link
2110-921-01 Rev. B / August 2013 4-11
If you select At Time, enter the time as follows:
1. Select the date by positioning the cursor in the month, day, or year field and using the up and
down arrows to increase or decrease digits. The date format is mm/dd/yyyy.
Where: mm = 2-digit month, dd = day, and yyyy = 4-digit year
2. Enter the time in 24-hour format by positioning the cursor in the hours, minutes, or seconds field
and entering the digits. The maximum time you can set is 23 hours, 59 minutes, and 59 seconds.
Where: hh = hours, mm = minutes, ss = seconds.
With Interval Of
Enter the interval time in the following format: hh/mm/ss
Where: hh = hours, mm = minutes, ss = seconds
• The maximum interval time is 23 hours, 59 minutes, and 59 seconds.
• The minimum interval time can be set 0.5 seconds.
Terminating Upon
Select one of the following options to instruct the instrument to stop taking readings and logging the
data.
• Number of Readings - 1 to approximately 65535 (Excel 2003 or later) or 1 to approximately
1048575 (Excel 2007 or later)
• Duration - readings are taken until the specified duration has elapsed
Chart
The following figure shows the Chart tab. Refer to the following topics for information about the fields
on the Chart tab.
Figure 35: Charts