User manual

KI-Tool And KI-Link Software User's Manual Section 4: KI-
Link
2110-921-01 Rev. B / August 2013 4-9
File Access
Use the File Access dialog box to save instrument settings to a file and restore them for use.
To save settings to a file:
1. Click the File Access icon.
The KI-Tool displays the dialog box shown in the following figure.
Figure 32: Load Multimeter Setting from File / Save Multimeter Setting to File
2. Select Save Multimeter Settings to File.
3. Click OK. The Windows Save As dialog box opens.
4. Enter the name that you want to use as the file name.
5. Click Save.
To restore the settings:
1. Select Load Multimeter Settings from File.
2. Click OK. The Windows Open dialog box is displayed.
3. Click the saved file you want to restore.
4. Click Open.
Get Single Reading
Use Get Single Reading to obtain a single reading from the instrument and select the cell in which to
save the reading.
Click the Get Single Reading
icon to display the Get Single Reading dialog box.
Figure 33: Get Single Reading