User manual

Section
4: KI-Link KI-Tool And KI-Link Software
User's Manual
4-8 2110-921-01 Rev. B / August 2013
Setup Multimeter
Use the Setup Multimeter dialog box to configure the instrument.
To configure the instrument:
1. Click the Setup Multimeter icon.
The KI-Link software displays the Device Settings dialog box, shown in the following figure.
Figure 31: Device Settings dialog box
2. Select a function from the function list.
3. Use the default values for range and resolution or open the drop-down menus to display a list that
shows appropriate values for the function.
4. Click the values you want to use.
5. If you are taking a second measurement with the instrument, check the Enable 2ND box.
6. Click the Submit button when you are finished selecting values.
7. Click Exit to close this dialog box.