User manual

KI-Tool And KI-Link Software User's Manual Section 3: KI-
Tool
2110-921-01 Rev. B / August 2013 3-21
Multiple Readings
Multiple Readings keeps the chart from updating while the instrument is taking readings. The KI-Tool
software stores the readings in a file and does not display dynamic curves.
Multiple Readings takes a specified number of measurements and puts them into the specified lists.
When you select Multiple Readings, stop is enabled while data is being taken.
The following figure shows the Multiple Readings dialog box. The following topics describe the fields
in the Multiple Readings dialog box.
Figure 18: Multiple readings
Instrument List
Use Instrument List to select the instrument to use to take the readings.
Number of Readings
Enter the number of readings you want the instrument to take. The minimum number of readings you
can take is 1 and the maximum number is 50,000.
Record List
Open the drop-down menu to select the record that the instrument will use for storing readings.
Start Readings
Click the Start Readings button to start the measurements.
Stop Readings
Click the Stop Readings button to stop the measurements.
Tool
The Tool menu has a command control submenu that provides an interactive dialog box for sending
SCPI commands to the instruments connected to your computer. Refer to your instrument's
Reference manual for information about SCPI commands.