User manual

KI-Tool And KI-Link Software User's Manual Section 3: KI-
Tool
2110-921-01 Rev. B / August 2013 3-13
Change Color
Configure the KI-Tool software to display the graphs for each instrument in the color you choose.
To select a color:
1. Click Change Color, the KI-Tool software displays the color palette as shown in the following
figure.
2. Select the color.
3. Click OK.
If a 2ND Change Color button is on the Reading Settings dialog box, repeat steps 1 through 3 to
change the 2ND color.
Figure 12: Color palette
Dual Measure
This feature is only available for instruments that support a 2ND function. Refer to
(5) 2ND function (if
equipped) (on page 3-9) for details.
Dual Measure is automatically selected when you select the 2ND function. If Dual Measure is
enabled, you can select the color that is used to graph the 2ND function.