User manual

Section
3: KI-Tool KI-Tool And KI-Link Software
User's Manual
3-10 2110-921-01 Rev. B / August 2013
Reading Settings
Use Reading Settings to configure the following KI-Tool software settings:
• Store the readings from multiple devices simultaneously.
• Display the readings in the color you select.
• Save the readings to a record.
Reading Mode
Select Single Device (on page 3-10) or Multiple Devices (on page 3-11
).
Single Device
Click Single Device to configure the instrument to take readings on one device only. The KI-Tool
software displays the following dialog box.
Click the Change Color and 2ND Change Color buttons (if present) to change the colors of the
graph display.
Figure 9: Reading Mode (single device)