User manual

Section
3: KI-Tool KI-Tool And KI-Link Software
User's Manual
3-6 2110-921-01 Rev. B / August 2013
(6) Function Panel
Select the function you want the instrument to perform by clicking the desired function button. See the
following table for a description of each function.
Button Function
DCI
DC current measurement.
ACI
AC current measurement.
4W
4-wire (
Ω
4) resistance measurement.
PERIOD
Period measurement.
DIODE
Diode ( ) test.
TCOUPL
Thermocouple temperature measurement.
DCV
DC voltage measurement.
ACV
AC voltage measurement.
2W
2-wire (
Ω
2) resistance measurement.
FREQ
Frequency measurement.
CONT
Continuity test.
TEMP
RTD temperature measurement.
CAP
Capacitance ( ) measurement.
(7) Graph Display
The Graph Display area shows the readings from up to four connected instruments in a graphical
format. Readings will not display until you select Start Readings (on page 3-21
) from the Operation
menu.
Menus
The menu bar provides the following menus:
• Settings (on page 3-6)
• Record (on page 3-15)
• Operation (on page 3-20)
• Tool (on page 3-21)
• About (on page 3-23)
Settings
Use the Settings menu to configure device and reading settings.
The Settings menu has four selections:
• Device Settings (on page 3-7)
• Reading Settings (on page 3-10)
• Refresh (on page 3-15)
• Exit (on page 3-15)