User manual

In this section:
Starting the KI-Tool Software ................................................... 3-1
Workspace ............................................................................... 3-2
Menus ...................................................................................... 3-6
Starting the KI-Tool Software
Connect the instruments to the computer first, before starting the KI-Tool software. If you forget to
connect the instruments first, you can click Refresh on the Settings menu to display the instruments.
Refer to Refresh (on page 3-15) for details.
To start the KI-Tool software from the desktop:
Double-click the KI-Tool software icon, shown in the following figure. The KI-Tool software opens.
Figure 2: KI-Tool icon
If the KI-Tool software icon is not on your desktop, perform the procedure below to start the KI-Tool
software from the Windows start menu.
To start the KI-Tool software from the start menu:
1. Click Start, All programs, and then click the Keithley Instruments folder. The folder opens, as
shown in the following figure.
Figure 3: Start menu
2. Click the KI-TOOL folder.
3. Click KI-Tool. The KI-Tool software opens.
Section 3
KI-Tool