User manual

Section
2: General overview Model 2110 5½ Digit Multimeter
Reference Manual
2-16 2110-901-01 Rev. C/August 2013
Keys, menus, and selection Description
NULL (MATH)
Press ► and ◄ keys to display additional selections. Refer to Math
operations (on page 3-48) for details.
OFF
Turn the math function off.
PERCENT
Select to configure PERCENT. Refer to Percent (on page 3-49) for
details.
RUN
Select RUN to start the function.
TARGET
Enter the target value using ▲ ▼ ► ◄ keys.
AVERAGE
Select to configure AVERAGE. Refer to Average (on page 3-50) for
details.
RUN
Select RUN to start the function.
NULL
Select to configure NULL. Refer to Null (on page 3-51) for details.
RUN
Select RUN to start the function.
LIMITS
Select to configure LIMITS. Refer to Limits (on page 3-53) for
details.
RUN
Select RUN to start the function.
HIGH LIMIT
Enter the high limit value using ▲ ▼ ► ◄ keys.
LOW LIMIT
Enter the low limit value using ▲ ▼ ► ◄ keys.
MX+B
Select to configure mX+b. Refer to mX+b (on page 3-54) for details.
RUN
Select RUN to start the function.
SET M
Enter the scale factor (m) value using ▲ ▼ ► ◄ keys.
SET B
Enter the scale factor (b) value using ▲ ▼ ► ◄ keys.
dB
Select to configure dB. Refer to dB (on page 3-57) for details.
RUN
Select RUN to start the function.
dB REL
Enter the relative reference using ▲ ▼ ► ◄ keys.
dBm
Select to configure dBm. Refer to dBM (on page 3-56) for details.
RUN
Select RUN to start the function.
REF RES
Enter the reference resistance using ▲ ▼ ► ◄ keys.