User manual

Section
5: Remote commands Model 2110 5½ Digit Multimeter
Reference Manual
5-40 2110-901-01 Rev. C/August 2013
[SENSe:]CURRent[:DC]:RANGe:AUTO <b>
This command turns DC current autorange on or off.
Parameters
<b> description
0 or OFF
Turn autorange off.
1 or ON
Turn autorange on.
Query
command description
CURRent[:DC]:RANGe:AUTO?
Query autorange state.
[SENSe:]DETector:BANDwidth <n>|MIN|MAX
Use this command to specify the lowest frequency expected in the input signal. The instrument selects the slow,
medium or fast AC filter based on the frequency you specify.
Parameters
<n> description
3 Slow AC filter. 3 Hz. A value less than 3 will error. A floor calculation is
performed.
20
Medium AC filter. 20 Hz.
200
Fast AC filter. 200 Hz. This is the default value.
MINimum
Select the minimum value.
MAXimum
Select the maximum value.
Query
command description
[SENSe:]DETector:BANDwidth?
Query the bandwidth.
[SENSe:]DETector:BANDwidth? MIN
Query the minimum bandwidth.
[SENSe:]DETector:BANDwidth? MAX
Query the maximum bandwidth.
Details
Refer to Bandwidth and resolution for AC measurements (on page 3-44) more information about bandwidth.