User manual

SCPI Conformance Information
I-20 2001-900-01 Rev. K / August 2010
:TRACe|:DATA
:CLEar [BUFFER,]
:EGRoup [BUFFER,] <name>
:EGRoup? [BUFFER,]
:FEED [BUFFER,]
:PRETrigger
:AMOunt
[:PERCent] [BUFFER,] <n>
[:PERCent]? [BUFFER,]
:READings [BUFFER,] <n>
:READings/ [BUFFER,]
:SOURce [BUFFER,] <name>
:SOURce? [BUFFER,]
Use :TRACe or :DATA as root command.
Clear readings from buffer.
Select element group: FULL, COMPact.
Query element group.
Select source of readings: SENSe[1], CALCulate[1], NONE.
Path to configure pre-trigger storage mode.
Path to specify number of pre-trigger readings.
Specify as a % (0 to 100) of buffer.
Query percentage.
Specify as a number.
Query number of readings.
Select pre-trigger source event: EXTernal, TLINk, BUS, MANual.
Query pre-trigger source event.
:ARM[;SEQuance[1]]
[:LAYer[1]]
:TCONfigure
:ASYNchronous
:ILINE <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:LAYer2
:TCONfigure
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to program arm layer 2:
Path to configure Triggers:
Enable (SOUR) or disable (ACC) Bypass: SOURce, ACCeptor.
Query direction.
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
:TRIGger[:SEQuence[1]]
:TCONfigure
:PROTocol <name>
:PROTocol?
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:SSYNchronous
:LINE <NRf>
:LINE?
Path to program trigger layer:
Path to configure Triggers:
Select protocol: ASYNchronous, SSYNchronous.
Query protocol.
Enable (SOUR) or disable (ACC) Bypass: SOURce, ACCeptor.
Query direction.
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to configure semi-synchronous Trigger Link:
Select trigger line (1 to 6).
Query trigger line.
Command Description