User manual

Getting Started
2-14 2001-900-01 Rev. K / August 2010
:DELay?, :SOURce?, and :TIMer?). For example, the
:TRIGger:SOURce? query command is used to request the
presently selected control source. After the query command
is sent and the Model 2001 is addressed to talk, a message
identifying the selected control source will be sent to the
computer.
q~ÄäÉ=OJS
Abbreviated common command summary
*CLS Clear status Clears error queue, event registers, and IEEE-488 bus service request (SRQ) line.
*RCL <n> Recall Returns the instrument to the setup configuration stored in memory (n = 0 for
STD, n = 0 to 4 for MEM1, or n = 0 to 9 for MEM2).
*RST Reset Returns the Model 2001 to *RST default conditions (see Appendix A).
*SAV <n> Save Saves the present setup configuration in memory (n = 0 for STD, n = 0 to 4 for
MEM1, or n = 0 to 9 for MEM2).
*TRG Trigger Issues a bus trigger (same as group execute trigger command; GET).