User manual

IEEE-488 Reference
2001-900-01 Rev. K / August 2010 4-61
Query :MMFactor? Query “m” factor for mX+b
Short-form format: :calc:kmat:mmf?
Response message: -1e21 to 1e21
Description This command is used to define the “m” factor for the CALC 1 mX+b calculation.
Programming example 10 OUTPUT 716; “:calc:kmat:mmf 2; mmf?”
20 ENTER 716; A$
30 PRINT A$
40 END
Line 10 Two commands in this program message; the first sets the “m” factor to two, and the second
queries the programmed “m” factor.
Line 20 Addresses the Model 2001 to talk.
Line 30 Displays the “m” factor (2).
:MBFactor <NRf>
:CALCulate[1]:KMATh:MBFactor <NRf> Specify “b” factor
Parameter <NRf> = -1e31 to 1e31 Specify “b” factor for mX+b calculation.
Format :calc:kmat:mbf <NRf>
Defaults Power-up Saved power-on setup
*RST “b” = 0
:SYSTem:PRESet “b” = 0
Query :MBFactor? Query “b” factor for mX+b
Short-form format: :calc:kmat:mbf?
Response message: -1e31 to 1e31
Description This command is used to define the “b” factor for the CALC 1 mX+b calculation.
Programming example 10 OUTPUT 716; “:calc:kmat:mbf 2; mbf?”
20 ENTER 716; A$
30 PRINT A$
40 END
Line 10 Two commands in this program message; the first sets the “b” factor to two, and the second
queries the programmed “b” factor.
Line 20 Addresses the Model 2001 to talk.
Line 30 Displays the “b” factor (2).