User manual

Recalling readings

Use the following steps to view stored readings and buffer statistics:

1. Press RECALL. The BUFFER annunciator indicates that stored readings are being

displayed. The arrow annunciator indicates that more data can be viewed with the

, , , and keys.

2. As shown in Figure 3-10, use the cursor keys to navigate through the reading num-

bers, reading values, and statistics. For any of the buffer statistics (maximum, mini-

mum, average, statndard deviation), the STAT annunciator is on.

3. Use the EXIT key to return to the normal display.

RDG NO. 10 Reading Value

RDG NO. 9 Reading Value

RDG NO. 8 Reading Value

RDG NO. 7 Reading Value

RDG NO. 6 Reading Value

RDG NO. 5 Reading Value

RDG NO. 4 Reading Value

RDG NO. 3 Reading Value

RDG NO. 2 Reading Value

RDG NO. 1 Reading Value

STD DEV Standard Deviation Value

Average Average Value

Min At XX Minimum Value

Max At XX Maximum Value

RANGE

Figure 3-10

Buffer locations

2000-900 (J - Aug 2010) BOOK.fm Page 18 Wednesday, October 12, 2011 12:29 PM