User manual

The Model 2000-SCAN is an optional 10-channel scanner card for the Model 2000 Mul-
timeter. Only one channel can be closed at a time. If you close a channel while another is
already closed, the first one opens with break-before-make operation.
You can use the scanner card two ways. One is to issue a command to close a particular
channel before sending other commands to take readings. The other way is to program the
scan list, and let the meter take care of closing a channel before taking a reading.
The following example program measures DC volts on channel 1, AC volts on channel 2,
and 2-wire resistance on channel 3, using the ROUTe:CLOSe command.
2000-900 (J - Aug 2010) BOOK.fm Page 8 Wednesday, October 12, 2011 12:29 PM