User manual

:FEED command
:FEED <name>
:TRACe:FEED <name> Specify readings source
Parameters <name> = SENSe[1] Put raw readings in buffer
CALCulate[1] Put calculated readings in buffer
NONE Put no readings in buffer
Query :FEED? Query buffer feed
Description This command is used to select the source of readings to be placed in the
buffer. With SENSe[1] selected, raw readings are placed in the buffer
when storage is performed. With CALCulate[1] selected, calculated math
readings (mx+b or PERCent or NONE) are placed in the buffer.
With NONE selected, no readings are placed in the buffer when storage
is performed over the bus.
:CONTrol <name>
:TRACe:FEED:CONTrol <name> Specify buffer control
Parameters <name> = NEVer Disables buffer storage
NEXT Fills buffer and stops
Query :CONTrol? Query buffer control
Description This command is used to select the buffer control. With NEVer selected,
storage into the buffer is disabled. With either of the other selections, stor
-
age is performed as long as buffer feed is not set for NONE (see
:TRACe:FEED NONE). When NEXT is selected, the storage process
starts, fills the buffer and then stops. The buffer size is specified by the
:POINts command.
:DATA? command
:DATA?
:TRACe:DATA? Send buffer readings
Description When this command is sent and the Model 2000 is addressed to talk, all
the readings stored in the buffer are sent to the computer. The format that
readings are sent over the bus is controlled by the :FORMat subsystem.
2000-900 (J - Aug 2010) BOOK.fm Page 69 Wednesday, October 12, 2011 12:29 PM