User manual

SCPI Command Reference 5-61
:SYSTem subsystem
The SYSTem subsystem contains miscellaneous commands that are
summarized in Table 5-8.
:BEEPer command
[:STATe] <b>
:BEEPer[:STATe] <b> Enable or disable beeper
Parameters <b> = 1 or ON Enable beeper
0 or OFF Disable beeper
Query [:STATe]? Query state of beeper
Description This command is used to enable or disable the beeper for limit tests.
:PRESet command
:PRESet
:SYSTem:PRESet Return to :SYSTem:PRESet defaults
Description This command returns the instrument to states optimized for front panel
operation. :SYSTem:PRESet defaults are listed in the SCPI tables (Ta
-
bles 5-2 through 5-11).
:KCLick command
:KCLick <b>
:SYSTem:KCLick <b> Enable or disable keyclick
Parameters <b> = 1 or ON Enable keyclick (default)
0 or OFF Disable keyclick
Query KCLick? Query status of keyclick
Description This command is used to enable or disable the keyclick. The keyclick can also be
enabled or disabled from the front panel by pressing SHIFT then LOCAL.
2000-900 (J - Aug 2010) BOOK.fm Page 61 Wednesday, October 12, 2011 12:29 PM