User manual

the 4-pole mode is selected. Use the rout:multiple:open <list> command
to open channel 11.
Examples of a list:
list = (@1,3,5) Channels 1, 3, and 5.
= (@1:5) Channels 1 through 5.
When this command is sent, the front panel channel number annunciators
are disabled. Use the following query command to determine which chan-
nels are closed.
:CLOSe:STATe?
:ROUTe:MULTiple:CLOSe:STATe? Query closed channels
Description This query command is used to determine which channels on the internal
scanner card are closed. After sending this command and addressing the
instrument to talk, a list of all closed channels is sent to the computer.
:OPEN <list>
:ROUTe:MULTiple:OPEN <list> Open specified channels
Parameter <list> = (@ chanlist) Specify channels to open
where chanlist is the list of channels (1 through 11) to be opened.
Description This command is used to open specified channels on the internal scanner
card. When this command is sent, the channels specified in the chanlist
will open.
Channel 11 is the 2-pole/4-pole relay. Opening channel 11 selects the 4-
pole operating mode.
Examples of a list:
list = (@1,3,5) Channels 1, 3, and 5.
= (@1:5) Channels 1 through 5.
2000-900 (J - Aug 2010) BOOK.fm Page 34 Wednesday, October 12, 2011 12:29 PM