User manual

:STATe <b>
:DISPlay[WINDow[1]]:TEXT:STATe <b> Control (on/off) message
Parameters <b> = 0 or OFF Disable text message
1 or ON Enable text message
Query :STATe? Query state of message mode.
Description This command enables and disables the text message mode. When en-
abled, a defined message is displayed. When disabled, the message is
removed from the display.
A user defined text message remains displayed only as long as the instru-
ment is in remote. Taking the instrument out of remote (by pressing the
LOCAL key or sending LOCAL 16), cancels the message and disables
the text message mode.
2000-900 (J - Aug 2010) BOOK.fm Page 27 Wednesday, October 12, 2011 12:29 PM