User manual

:FORMat <name>
CALCulate2:FORMat <name> Specify CALC2 format
Parameters <name> = NONE No calculations
MEAN Mean value of readings in buffer
SDEViation Standard deviation of readings in buffer
MAXimum Largest reading in buffer
MINimum Lowest reading in buffer
Query :FORMat? Query programmed math format
Description This command is used to specify the format for the CALC2 math calcula-
tion. The calculation operations for CALC2 use data stored in the buffer.
With NONE selected, no CALC2 calculation is performed. With any of the
other formats selected and CALC2 enabled (see :STATe), the calculation
is performed every time the :IMMediate or :IMMediate? command is exe
-
cuted.
:STATE <b>
:CALCulate2:STATe <b> Control CALC2
Parameters <b> = 0 or off Disable CALC2 calculation
1 or on Enable CALC2 calculation
Query :STATe? Query state (on or off) of CALC2.
Description This command is used to enable or disable the CALC2 calculation. When
enabled, the selected CALC2 format will be calculated when the :IMMe-
diate or :IMMediate? command is executed.
2000-900 (J - Aug 2010) BOOK.fm Page 22 Wednesday, October 12, 2011 12:29 PM