Datasheet
www.keithley.com
1.888.KEITHLEY (U.S. only)
DIGITAL MULTIMETERS & SYSTEMS
A GREATER MEASURE OF CONFIDENCE
DC OPERATING CHARACTERISTICS
2
Function Digits Readings/s PLCs
8
DCV (all ranges), 6½
3, 4
510
DCI (all ranges), and 6½
3, 7
30 1
Ohms (<10M range) 6½
3, 5
50 1
5½
3, 5
270 0.1
5½
5
500 0.1
5½
5
1000 0.04
4½
5
2000 0.01
DC SYSTEM SPEEDS
2, 6
RANGE CHANGE
3
: 50/s.
FUNCTION CHANGE
3
: 45/s.
AUTORANGE TIME
3, 10
: <30ms.
ASCII READINGS TO RS-232 (19.2K BAUD): 55/s.
MAX. INTERNAL TRIGGER RATE: 2000/s.
MAX. EXTERNAL TRIGGER RATE: 400/s.
DC GENERAL
LINEARITY OF 10VDC RANGE: ±(1ppm of reading + 2ppm of range).
DCV, Ω, TEMPERATURE, CONTINUITY, DIODE TEST INPUT PROTECTION: 1000V, all ranges.
MAXIMUM 4WΩ LEAD RESISTANCE: 10% of range per lead for 100Ω and 1kΩ ranges; 1kΩ per
lead for all other ranges.
DC CURRENT INPUT PROTECTION: 3A, 250V fuse.
SHUNT RESISTOR: 0.1Ω for 3A, 1A, and 100mA ranges. 10Ω for 10mA range.
CONTINUITY THRESHOLD: Adjustable 1Ω to 1000Ω.
AUTOZERO OFF ERROR: Add ±(2ppm of range error + 5µV) for <10 minutes and ±1°C change.
OVERRANGE: 120% of range except on 1000V, 3A, and diode.
SPEED AND NOISE REJECTION
Rate Readings/s Digits
RMS Noise 10V
Range NMRR
12
CMRR
13
10 PLC 5 6½ < 1.5 µV 60 dB 140 dB
1 PLC 50 6½ < 4 µV 60 dB 140 dB
0.1 PLC 500 5½ < 22 µV — 80 dB
0.01 PLC 2000 4½ < 150 µV — 80 dB
DC NOTES
1. Add the following to “ppm of range” uncertainty:1V and 100V, 2ppm; 100mV, 15ppm; 100Ω, 15ppm; 1kΩ–
<1MΩ, 2ppm; 10mA and 1A, 10ppm; 100mA, 40ppm.
2. Speeds are for 60Hz operation using factory default operating conditions (*RST). Autorange off, Display off,
Trigger delay = 0.
3. Speeds include measurement and binary data transfer out the GPIB.
4. Auto zero off.
5. Sample count = 1024, auto zero off.
6. Auto zero off, NPLC = 0.01.
7. Ohms = 24 readings/second.
8. 1 PLC = 16.67ms @ 60Hz, 20ms @ 50Hz/400Hz. The frequency is automatically determined at power up.
9. For signal levels >500V, add 0.02ppm/V uncertainty for the portion exceeding 500V.
10. Add 120ms for ohms.
11. Must have 10% matching of lead resistance in Input HI and LO.
12. For line frequency ±0.1%.
13. For 1kΩ unbalance in LO lead.
14. Relative to calibration accuracy.
15. Specifications are for 4-wire ohms. For 2-wire ohms, add 1Ω additional uncertainty.
16. For rear inputs, add the following to temperature coefficient “ppm of reading” uncertainty 10MΩ 95ppm,
100MΩ 900ppm. Operating environment specified for 0º to 50ºC and 50% RH at 35ºC.
2000
6½-Digit Multimeter
DC Characteristics
Conditions: MED (1 PLC)
1
or SLOW (10 PLC)
or MED (1 PLC) with filter of 10
Accuracy: ±(ppm of reading + ppm of range)
(ppm = parts per million)
(e.g., 10ppm = 0.001%)
Function Range Resolution
Test Current
or Burden Voltage
(±5%)
Input
Resistance
Temperature
Coefficient
0°–18°C and 28°–50°C
24 Hour
14
23°C ± 1°
90 Day
23°C ± 5°
1 Year
23°C ± 5°
Voltage
100.0000 mV 0.1 µV
> 10 GΩ
30 + 30 40 + 35 50 + 35 2 + 6
1.000000 V 1.0 µV
> 10 GΩ
15 + 6 25 + 7 30 + 7 2 + 1
10.00000 V 10 µV
> 10 GΩ
15 + 4 20 + 5 30 + 5 2 + 1
100.0000 V 100 µV
10 MΩ ±1%
15 + 6 30 + 6 45 + 6 5 + 1
1000.000 V
9
1 mV
10 MΩ ±1%
20 + 6 35 + 6 45 + 6 5 + 1
Resistance
15
100.0000
Ω
100
µΩ
1 mA 30 + 30 80 + 40 100 + 40 8 + 6
1.000000
kΩ
1
mΩ
1 mA 20 + 6 80 + 10 100 + 10 8 + 1
10.00000
kΩ
10
mΩ
100 µA 20 + 6 80 + 10 100 + 10 8 + 1
100.0000
kΩ
100
mΩ
10 µA 20 + 6 80 + 10 100 + 10 8 + 1
1.000000
MΩ
16
1
Ω
10 µA 20 + 6 80 + 10 100 + 10 8 + 1
10.00000
MΩ
11, 16
10
Ω
700
nA // 10MΩ
150 + 6 200 + 10 400 + 10 95 + 1
100.0000
MΩ
11, 16
100
Ω
700
nA // 10MΩ
800 + 30 1500 + 30 1500 + 30 900 + 1
Current
10.00000 mA 10 nA < 0.15 V 60 + 30 300 + 80 500 + 80 50 + 5
100.0000 mA 100 nA < 0.03 V 100 + 300 300 + 800 500 + 800 50 + 50
1.000000 A 1 µA < 0.3 V 200 + 30 500 + 80 800 + 80 50 + 5
3.00000 A 10 µA < 1 V 1000 + 15 1200 + 40 1200 + 40 50 + 5
Continuity 2W
1
kΩ
100
mΩ
1 mA 40 + 100 100 + 100 120 + 100 8 + 1
Diode Test
3.00000 V 10 µV 1 mA 20 + 6 30 + 7 40 + 7 8 + 1
10.00000 V 10 µV 100 µA 20 + 6 30 + 7 40 + 7 8 + 1
10.00000 V 10 µV 10 µA 20 + 6 30 + 7 40 + 7 8 + 1
Model 2000 specifications
Model 2000 specifications