User Manual

Boppad ediTor
15
Boppad
• Dynamic - soft hits are normalized and medium and hard hits have a logarithmic curve applied.
• User - use a user dened curve to shape the data.
Min
Set a minimum value for the data.
Max
Set a maximum value for the data.
solo
Only sends the data from the corresponding modline. Useful for MIDI mapping in DAWs and other
music software. This is set to off on power cycle, or a preset load.
5.1.5 The deviCe seTTings
The Device Settings section contains settings that inuence the overall behavior of your BopPad.
• Unison Mode - Makes BopPad function as one quadrant (all four quadrants use the settings for the
selected Unison Quadrant). Any quadrant can be the Unison quadrant by selecting that quadrant
and clicking on the Unison button.
• All Quadrant Mode - Allows you to edit the note values, modline values, and quadrant settings for
all four quadrants at the same time.
live valUe
The real-time value of the source. Helpful for ne tuning the response of a sensor to a desired range
or destination.
Even though you can monitor the updates in real time, you still need to
save and send the preset to the BopPad for the preset to be stored onto
the device.