User Manual

5.8 Factory Presets Guide (Advanced Editor)
All factory presets are set to output over both USB and MIDI Expander (if one is connected) on MIDI
Channel 1.
Program Change (PRGM)
Each key outputs a program change message. The up and down keys on the Nav Pad increment/
decrement by “decades” (increments of 10) —!stepping on a key fills in the final value (0-9) and
outputs the program change message. This allows access to all program change messages, 0-127.
Toggles (TOGL)
Each key outputs a toggling CC message (CCs 20-29). Step on a key and it toggles on (outputs a
127), step on that key again and it toggles off (outputs a 0). Each key’s green LED provides visual
feedback of the current toggle state —!it lights up green when on and turns off when off.
Appendix 70