User Manual

Once

(Hosted mode only)

The key name will be displayed as soon as the key is pressed for the ﬁrst time, after a brief period

the preﬁx and parameter value will be displayed. Any subsequent key presses will display the

preﬁx and parameter value.

Initial/Return

The key name will be displayed as soon as the key is pressed. After a brief period the preﬁx and

parameter value will be displayed.

Immed Param

Displays the key’s preﬁx and parameter value whenever the key is pressed.

5.6 LED Modes

LED modes deﬁne how the SoftStep’s LEDs should behave. Tell them when to turn on, when to turn off,

and more. Each of the following options are available in the Advanced Editor for both the green and

red LEDs:

None

Has no effect on the LED state. If the LED is currently on, it will stay on —!if it’s off, it will stay off.

True

The LED will turn on when the modline value is 1 or greater. It will turn off when the modline value

is equal to 0.

False

The LED will turn on when the modline value is equal to 0. The LED will turn on when the modline

value is 1 or greater.

Flash True

The LED will continuously ﬂash when the modline value is 1 or greater. It will turn off when the

modline value is equal to 0.

Flash False

The LED will continuously ﬂash when the modline is equal to 0. It will turn off when the modline

value is 1 or greater.

Appendix 66