User Manual

ID
Sets the device ID number for the MMC message. Each MMC-capable device should have a
unique ID number (most devices/software allow the user to set the ID number in case of
conflicts).
Function
Sets the MMC function/command that should be sent. The following are available with
SoftStep:
•
Stop
•
Play
•
Deferred Play
•
Fast Forward
•
Rewind
•
Punch In
•
Punch Out
•
Pause
OSC
(Hosted mode only)
Outputs values as an OSC message with a specified prefix. OSC settings such as input port, output
port, output IP address can be set in the OSC tab of the Settings window. The following options are
available when OSC is selected:
Output Prefix
Sets the prefix to output with the OSC message. A prefix typically begins with a “/” character,
e.g. /softstep or /controller. Defaults to “/softstep” (no quotes) when no prefix is specified.
Aftertouch
(Hosted mode only)
Outputs values as MIDI aftertouch messages. The following options are available when Aftertouch
is selected:
Ch
Sets the MIDI channel to output the aftertouch messages on.
Poly Aftertouch
(Hosted mode only)
Appendix 62