User Manual

Ch
Sets the MIDI channel to output the CC messages on.
Bank
Outputs values as MIDI bank select messages. The following options are available when Bank is
selected:
MSB
Sets the MSB of the bank message.
Ch
Sets the MIDI channel to output the bank select messages on.
Note: Bank Select messages are 14-bit resolution (a range of 0-16383), as opposed to the standard 7-
bit MIDI message (range 0-127). This is accomplished by using two separate messages: a MSB (most
significant bit) and an LSB (least significant bit). With SoftStep, values passing through the modline will set
the LSB of the bank message —!the MSB must be fixed at a specified value (using the MSB option).
Program
Outputs values as MIDI program change messages. The following options are available when
Program is selected:
Ch
Sets the MIDI channel to output the program change messages on.
Pitch Bend
Outputs values as MIDI pitch bend messages.
•
0 = full bend down
•
63 = center (no bend)
•
127 = full bend up
The following options are available when Pitch Bend is selected:
Ch
Sets the MIDI channel to output the pitch bend messages on.
MMC
Used to send MIDI Machine Control (MMC) messages. The following options are available when
MMC is selected:
Appendix 61