User Manual

X Increment
Similar to a horizontal slider/fader. Applying pressure to the right side of the key will output an
incrementing value, while pressure to the left side will output a decrementing value.
The Speed at which the source increments/decrements can be modified using the X Inc Speed
options in the Keys tab of the Settings window.
•
Range: 0-127
Y Increment
Similar to a vertical slider/fader. Applying pressure to the upper half of the key will output an
incrementing value, while pressure to the bottom half will output a decrementing value.
The speed at which the source increments/decrements can be modified using the Y Inc Speed
options in the Keys tab of the Settings window.
•
Range: 0-127
Foot On
Outputs a 127 when the key is pressed and a 0 when the key is released.
Foot Off
The inverse of Foot On — outputs a 0 when the key is pressed and a 127 when the key is released.
This could also be created using Foot On, setting the gain to -1, and adding an offset of 127 — but
hey, this is faster and with less thinking involved.
Top
(Hosted mode only)
Outputs a 127 when the top half of the key is pressed and a 0 when the key is released.
Bottom
(Hosted mode only)
Outputs a 127 when the bottom half of the key is pressed and a 0 when the key is released.
Fast Trig
(Hosted mode only)
Pressing the key immediately outputs a 127 followed by a 0 (100ms later).
Dbl Trig
Two quick presses of the key will output a 127 followed by a 0 (100ms later).
Appendix 55