User Manual

Display Mode Switch
(Standalone mode only)
Switches the SoftStep display behavior for program changes. Data can be displayed in the
0-127 range or the 1-128 range.
Key Safety Mode
Sets how many keys can be activated simultaneously.
•
Single Key: Only one key can be activated at a time.
•
Adjacent Lockout: (Hosted mode only) Keys immediately adjacent to an activated SoftStep
key cannot be triggered.
•
All Keys: Any key can be activated at any time.
Sensitivity Adjustment
Adjusts the sensitivity of the SoftStep. Moving the slider to the right (toward the “+” symbol)
increases sensitivity —!moving the slider to the left (toward the “-” symbol) decreases sensitivity.
Clicking the RESET SENSITIVITY button will reset the sensitivity slider to its default value.
4.4.3 Keys Tab
The Keys tab contains settings that apply to individual keys on the SoftStep. Adjust on and off
thresholds for each key or change X/Y Increment speeds per key.
Keys Section
The Keys section contains settable parameters for each of
the SoftStep keys. Each numbered row corresponds to the
key of the same number.
X Inc Speed
Sets the speed at which the X Increment source
increments/decrements. Higher values make the
source move faster —!lower values make the source
move slower.
Y Inc Speed
Sets the speed at which the Y Increment source
increments/decrements. Higher values make the
source move faster —!lower values make the source
move slower.
GLOBAL KEYS I/O
PEDAL
SETTINGS
Keys
Nav Pad
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
10
10
10
10
10
10
10
10
10
10
5
5
5
5
5
5
5
5
5
5
10 10 10 10
0
5 5 5 5
x inc
speed
y inc
speed
on
thresh
off
thresh
1
2
3
4
5
6
7
8
9
10
on thresh
off thresh
N S E W
y inc
speed
Advanced Editor 44