User Manual

4.2.5 Add/Delete Modlines
The “plus” button adds a modline (maximum of 6 per key) and the “minus”
button deletes a modline (minimum of 2).
When deleting a modline, the settings are preserved but the modline is
disabled. This allows the modline to be added back if it was deleted by
mistake and also prevents potential confusion that could arise if there were
active, hidden modlines.
4.2.6 Nav Pad Modulation Window
The Nav Pad’s modulation window has a few differences from the other keys’ modulation windows.
•
There are no green or red LED options available since there are no LEDs for the Nav Pad.
•
There is a slightly different source list than the other keys (see Nav Pad Sources in the Appendix for a
complete list of Nav Pad-exclusive sources).
•
The Nav Pad has a Mode setting in the top-left corner with two options: “modline” and “program
change”
•
Modline: Use the Nav Pad with the modlines like a
normal key.
•
Program Change: For use with the Nav Yx10 & Key
source —!this allows the Nav Pad to count
“decades” (increments of 10) from 0 to 12 (or
whatever the counter’s min and max are set to).
This option will disable the use of modlines on the
Nav Pad.
+ —




modline
program change
Advanced Editor 41