User Manual

(4) Prefix
One or two characters that can be added in front of the parameter value on the SoftStep’s display
—!e.g. with a prefix of “FF” and a modline value of 57, the display would read “FF57”.
Leave blank for no prefix.
(5) Green LED
Sets the behavior of the key’s green LED. For a complete list of all available LED modes (and what
they do), see the LED Modes section of the Appendix.
(6) Red LED
Sets the behavior of the key’s red LED. For a complete list of all available LED modes (and what
they do), see the LED Modes section of the Appendix.
(7) Active Display Modline Selector
Selects which modline’s data will be used for the Display mode settings. Only one modline can be
selected per key.
4.2.4 Counter
The key counter increments/decrements (or “counts”) between
two set values — a minimum and a maximum. Interacting with the
counter is accomplished using the Counter Set, Counter Inc, and
Counter Dec tables in the modlines.
Min
Sets the minimum value for the key counter. No values below this will be output.
Max
Sets the maximum value for the key counter. No values above this will be output.
Wrap
When checked, the key counter will loop back to the minimum value once the maximum value is
exceeded (and vice versa). When unchecked, the counter will stop once the minimum or maximum
values are reached.
Min Max Wrap
1270





Advanced Editor 40