User Manual

4.2.3 LED+Display Settings
Hidden by default, the LED+Display Settings section can be accessed by clicking the LED+DISPLAY
SETTINGS button in the top-right corner of the key modulation window.
These settings are part of the modlines and define how a SoftStep key’s green and red LEDs behave, as
well as how the SoftStep display behaves when the key is pressed.
When displayed, the LED+Display Settings look like this:
(1) Show/Hide Switch
Shows and hides the LED+Display Settings section of the modulation window. The settings still
apply when hidden.
(2) Key Name
Sets the name of the key. Key names are used with the SoftStep’s display in certain situations
(defined by the Display Mode option).
Note: Key names can also be edited in the key box area of the editor’s main window.
(3) Display Mode
Sets how the SoftStep’s display should behave when the key is pressed. For a complete list of all
available display modes (and what they do), see the Display modes section of the Appendix.
FalseTrue
Green LED Red LED
NoneFlash Fast False
Green LED Red LED
Immed Param
NINE
Display ModeKey Name
DT
Prefix
LED+DISPLAY SETTINGS
1 2 3 4
5 6 7
Advanced Editor 39