User Manual

(5) Pedal Input
Used to connect an expression pedal to the SoftStep. All input should use a 3.5mm (1/8”) TRS
cable to work properly. Most expression pedals have a stereo 1/4” jack —!an expression pedal
adapter (female 1/4” TRS to male 3.5mm TRS) is included with every SoftStep.
2.1.2 Specs
The “deets”:
Dimensions & Weight
•
Dimensions: 4.1” x 17.7” x 0.94” (105mm x 450mm x 24mm)
•
Weight: 1.3 lbs (0.59 kg) (approximately)
Power Draw / Requirements
The SoftStep can be powered via the main USB port or the Expander port. It should never be
powered from both ports at the same time —!this may result in damage to the hardware.
Voltage: +5V
Power draw: SoftStep 1 = 105mA,!SoftStep 2 = 140mA (approximate measurements)
Note: There are no user serviceable parts inside the SoftStep. Attempts to open the enclosure will void
the warranty.
Getting Started 12