User's Manual
Table Of Contents
Connecting 12 Step
Connect 12 Step to a computer
This image shows 12 Step set up to send MIDI data to a computer.
1. Use a USB A-to-B cable to connect the main 12 Step USB port to a USB port on
your computer. 12 Step will receive power from the computer.
2. You can also connect an Expression pedal to the Express port using the 1/4” to
1/8” adapter. Just make sure you have an expression pedal with a 3 wire
connection (a stereo jack).
Connect 12 Step to MIDI hardware
The image above shows 12 Step connected to a hardware synth via our MIDI Expander
1. Use a USB A-to-B mini cable to connect the 12 Step Expansion port to the USB “to
Expand” port on the MIDI Expander.
2. Connect the power supply to the MIDI Expander USB “Power” port.
3. Connect the MIDI Out on the Expander to the MIDI In on the synth.
4. You can also connect an Expression pedal to the Express port using the 1/4” to
1/8” adapter. Just make sure you have an expression pedal with a 3 wire
connection (a stereo jack).
6