User's Manual

You will be able to see which decade you are in while incrementing and decrementing by

looking at the alpha numeric display on the upper right side of the 12 Step. After

selecting the preset you will automatically be taken out of Select Mode.

Select mode can also be used to shift octaves. After entering Select mode use the -Oct or

the +Oct keys (another name for the -10 and +10 keys) to shift up or down an octave.

After shifting octaves you will be taken out of select mode automatically.

Modlines

In addition to playing notes you can also use the pressure sensor sources for each key pad

to control an abundance of MIDI parameters. Velocity, Bend, Volume, X-Fade, Pan, 2

CC #’s, Ch AfterTouch, and Poly AfterTouch can all be controlled in various ways by

using a modline for the corresponding MIDI parameter you would like to use. Below is an

image of the velocity modline:

The first thing in the modline that you can modify is the sources for voice A and voice B.

These can be different if you like. The sources all interpret the sensor data in different ways

and will produce different types of responses from your foot presses. This will depend on

what selection you make from the source drop down menu next to each parameter:

Sources

Using our sensor key technology we can tell how hard (Pressure) and at what angle (Tilt) you

are activating the key. This is a very powerful set of performance modifiers. We also provide the

inverted version of each source so you can easily do crossfades and pans.

Velocity is based on how hard you press on the key to trigger

+ Velocity - this outputs a value that represents the overall pressure of your foot on the

key pad when you first step on the key. The value will be between 0 and 127 with 127

indicating the most pressure.

- Velocity - this outputs a value that represents the overall pressure of your foot on the key

pad when you first step on the key. The value will be between 0 and 127 but this source is

inverted so 0 would indicate the most pressure.

Pressure is the combined force of how hard your foot is pressing on the key

+ Pressure - this outputs continuous values that represent the pressure of your foot on the

key pad. The value will be between 0 and 127 with 127 indicating the most pressure.

- Pressure - this outputs continuous values that represent the pressure of your foot on the

key pad. The value will be between 0 and 127 but this source is inverted so 0 would

indicate the most pressure.

Tilt is the angle of the key determined by the relative pressure on the front vs the

back of the key. You must move the key through its On Angle which is where the

front and back of the key are pressed equally. This allows you to invoke Tilt when

you want it. For example, Tilt is mapped to bend, but you really want most keys to