User Manual

06
AIR250 SEATED LEG CURL
OPERATION MANUAL
TECHNICAL SPECIFICATIONS
Figure 2. Air250 Seated Leg Curl Equipment Specications
46 inches
(1,168 mm)
45 inches
(1,143 mm)
58 inches
(1,473 mm)
196 lbs
(89 kg)
MODEL 1221
MODEL 1222
232 lbs
(105 kg)
EQUIPMENT SPECIFICATIONS
TECHNICAL DATA
See Figure 2 for Air250 Seated Leg Curl dimensions and weight.
1221 & 1222 Models specications:
• Resistance Range 0 – 260 lbs (0 – 118 kg),
change resistance in 1 lb/kg increments
• Adjustable Seat Back, Leg Cushion, and
Thigh Cushion.
• 0° – 135° Range of Motion
• Maximum user weight limit:
441 lbs (200 kg)
Range of Motion Limiter specications
1222 Model:
• START positions
0° – 100°, change in 10° increments
• STOP positions (degrees of exion)
10° – 120°, change in 10° increments
(Max at 135°)
Model 1222 Air250 Seated Leg Curl with Range of Motion Limiter shown
Model 1221 Air250 Seated Leg Curl has same dimensions
AIR STORAGE TANK
The equipment contains an air storage tank (air accumulator) with the following operating parameters:
POWER
• 1.5V D Alkaline Batteries (quantity 2, Keiser PN 966500)
• 3V CR2032 Lithium Coin Cell Battery (quantity 1)
Permanently attached, not serviceable. Contact Keiser Customer Support for service.
KEISER CHIP SYSTEM
• The eChip insertion slot receives the Keiser eChip (electronic memory chip) for data transfer and storage
Maximum working pressure: 125 psi (8.6 bar)
Maximum working temperature: 104ºF (40ºC)
Minimum working temperature: 32ºF (0ºC)
Maximum vessel capacity: 140 in
3
(2.29 L)