User Manual

02
AIR250 SEATED LEG CURL
OPERATION MANUAL
CONTENTS
03 — GENERAL INFORMATION
03_INTRODUCTION
03_REGISTER YOUR PURCHASE
03_SERIAL NUMBER INFORMATION
04 — IMPORTANT SAFETY INFORMATION
06 — TECHNICAL SPECIFICATIONS
06_EQUIPMENT SPECIFICATIONS
06_TECHNICAL DATA
07 — INSTALLATION AND PLACEMENT
07_TRAINING SPACE
08 — OPERATION
08_EQUIPMENT OVERVIEW
09_POWER DISPLAY
10_DISPLAY FEATURES
11_PROPER OPERATION CHECK
12_HOW TO USE THE AIR250 SEATED LEG CURL
13_HOW TO USE THE ROM LIMITER
14_POWER TEST
15 — MAINTENANCE
15_PREVENTATIVE MAINTENANCE SCHEDULE
16_BATTERY REPLACEMENT
17_ANNUAL MAINTENANCE
18 — REGULATORY AND COMPLIANCE NOTICES
18_SAFETY NOTIFICATIONS
19_ELECTROMAGNETIC COMPATIBILITY (EMC)
19_US FCC COMPLIANCE STATEMENT
19_DISPOSAL
20 — WARRANTY STATEMENT
Keiser, the Keiser logo, and other trademarks associated with Keiser products referred to in this publication are trademarks of Keiser Corporation.
© 2020 Keiser Corporation. All rights reserved.
Distribution and copying of this document, use and communication of its contents is not permitted without written authorization from Keiser Corporation. The content
of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by Keiser Corporation.
Every effort has been made to ensure that the information in this manual is accurate. Keiser Corporation is not responsible for printing or clerical errors.