Use and Care Manual

www.kegco.com 6 1-888-980-4810
Operation Instructions
The kegerator should be placed in an area where the ambient temperature is between 32-100 degrees Fahrenheit. If
the ambient temperature is above or below this range, the performance of the unit may be affected. For example,
placing your unit in extreme cold or hot conditions may cause the interior temperatures to fluctuate.
Your Kegco Kegerator includes an operating panel on the inside front. The operating panel includes several features to
operate and control the temperature of the kegerator, including:
ON/OFF - Turns the unit on or off
TEMP SET - Displays the desired temperature on an LED display
UP/DOWN Buttons – Increases or decreases the temperature in 1 degree increments
°C / °F – Indicates whether the displayed temperature is in Celsius and Fahrenheit
°C / °F Button – Toggles the displayed temperature between Celsius and Fahrenheit
LIGHT - Turns the interior light on or off
If you are going on vacation, you may leave the kegerator operating during vacations of less than three weeks. If the
appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the
interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.
Setting Temperature
This Kegco Kegerator has a temperature range of 32 to 75 degrees Fahrenheit. You can set the temperature as you
desire by touching the UP or DOWN button. When you touch the buttons for the first time, the LED readout will show
the original temperature set at the manufacturing facility. Each push of the button will adjust the temperature by one
degree in the desired direction. Please be aware that the desired temperatures may fluctuate depending on whether
the interior light is ON or OFF and depending on the positioning of the keg and any other items.
PLEASE NOTE:
 In the event of a power interruption, all previous temperature settings will be automatically saved and the unit
will return to the previous temperature setting.
 If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting. Attempting
to restart the kegerator before this time has elapsed may prevent it from starting.
 When you use the kegerator for the first time or restart the kegerator after having been shut off for a long time,
there will be a few degrees variance between the temperature you select and the one indicated on the LED
readout for the first few hours of operation. After a few hours of operation, the temperature will normalize to
the displayed temperature.