INSTRUCTION MANUAL 15” BUILT-IN KEGERATOR MODEL：VSK-15 BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Kegco has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice KEGCO 8520 Miralani Dr., San Diego, CA 92126 www.kegco.
Table of Contents Diagram and Description .................................................................................................................................... 3 Safety Tips .................................................................................................................................... 4 Installation Instructions ....................................................................................................................................
Diagram and Description 1. 2. 3. 4. 5. 6. 7. 8. Draft Tower Control Panel Temperature Sensor Fan Front Ventilation Base Door Hinge Adjustable Feet Door Handle 9. Door Lock www.kegco.
Safety Tips Before using this appliance, it must be properly positioned and installed as described in this manual, so please read carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow these basic precautions. Plug into a grounded 3-prong outlet. Do not under any circumstances cut or remove the third ground prong from the power cord supplied, do not use an adapter, and do not use an extension cord.
Installation Instructions BEFORE USE: Remove the exterior and interior packaging. Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. Clean the interior surface with lukewarm water using a soft cloth. Install handles. This appliance is designed for free standing or built-in (fully recessed) installation.
Operation Instructions The kegerator should be placed in an area where the ambient temperature is between 32-100 degrees Fahrenheit. If the ambient temperature is above or below this range, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause the interior temperatures to fluctuate. Your Kegco Kegerator includes an operating panel on the inside front.
Care and Maintenance Cleaning your kegerator: Turn off the power, unplug the appliance, and remove all items. Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts. Wash the outside cabinet with warm water and mild liquid detergent.
Troubleshooting There are many common issues you may experience with your kegerator that can be solved very easily, without the need of a service call. Try the tips below to troubleshoot your unit should you experience any problems: PROBLEM Kegerator does not operate Kegerator is not cold enough Kegerator is turning on and off frequently The light does not work Vibrations The kegerator seems to make too much noise The door will not close properly www.kegco.
Technical Specifications Storage Capacity One (1) 5 Gallon Keg OR One (1) 7.75 Gallon Quarter Slim Keg Dimensions 33-1/2" H x 15" W x 23-1/4" D (25" w/ handle) Weight 92.6 lbs. Voltage / Frequency 115v / 60 Hz Running Amps 2.3 A Operating Temperature 32°F - 75°F Ambient Temperature 32°F – 100°F www.kegco.
Warranty Information WHAT IS COVERED LIMITED ONE-YEAR WARRANTY: For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.
