Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Introduction
- General Information
- In the Box and Unpacking
- Setting Up LS50 Wireless II
- Connection and Control Interface
- Wi-Fi Streaming
- Multi-Room Streaming
- Voice Control Over Mobile Device
- Playback with Bluetooth
- Playback with HDMI eARC input
- Playback with Coaxial Input
- Playback with Optical Input
- Playback with Auxiliary Input
- Using KEF Connect App
- Cleaning and Maintenance
- Disposal
- FAQ and Troubleshooting
- Appendix
- Quick Start Guide
- Connectivity Quick Guide
- Product Info
- Important Safety Information & Specs
69
Table of ContentsSetting UpWi-Fi StreamingUsing KEF Connect AppFAQ and Troubleshooting
15. Cleaning and Maintenance
WARNING!
Risk of electric shock!
Improper cleaning of the speakers may result in injury.
• Always unplug the power cables from the power sockets/outlets before cleaning the
speakers.
NOTICE!
Risk of short circuit!
Water and other liquids that have penetrated the housing may cause a short circuit.
• Make sure that no water or other liquids penetrate the housing of the speakers.
• Never immerse the speakers in water or other liquids.
NOTICE!
Risk of damage!
Improper handling of the speakers may result in damage.
• Do not use any aggressive cleaners, brushes with metal or nylon bristles, or sharp or
metallic cleaning utensils such as knives, hard scrapers and the like. They could damage
the surfaces.
1. Disconnect the power cables of the speakers from the power sockets/outlets before
cleaning.
2. Clean the surfaces of the speakers with a clean lint-free cloth. If necessary, use an
alcohol-free cleaner (e.g. screen cleaner and eyeglass lens cleaner) to remove stubborn
stains.
3. Use an anti-static cleaner to carefully clean the Uni-Q drivers (speaker cones) with a
soft sponge.