User's Manual

1.6 foot down⑼
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head
andfoot actuators start moving;
1.7 Flat⒀
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat；
1.8 Massage head⑴
Click MASSAGE HEAD button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3；
1.9
Massagefoot⑶
Click MASSAGE Foot button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3；
1.10 Massagemode⑵
Click MASSAGE Mode button to switch the massage mode.
1.11 Under bed light⑸
Click the under bed light button, the under bed light switch its on/off state; After the under bed
light opens, if do not manually close, it will automatically turn off after 5 minutes;
1.12 Memory position ⑽⑿
Click memory position to move the actuator to the memory position.
The product is the remote control of the bed, and the matching model is MC120NM.
FCC ID:2AK23MC120NM
RF Function:2.4G SRD
Operating Band/Frequency:2403-2480MHz
Antenna Type:PCB antenna
Maximum Antenna Gain:1dBi
Manufacturer:Keeson Technology Corporation Limited
Address:No. 195, Yuanfeng East Road, Wangjiangjing, Xiuzhou District,
Jiaxing City, China 314000
3 / 4