User's Manual

Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of movingto memory positions, the head and foot actuatorsmove first,
then the tilt and lumbar actuators move;
1.2 Head up⑸
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released；
1.3 Head down⑹
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
1.4 Foot up⑺
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.5 foot down⑻
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head
andfoot actuators start moving;
1.6 Flat⑼
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat；
1.7 Massage head⑵
Click MASSAGE HEAD button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3；
Item
1.1 ZG button⑾
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;