User's Manual

Preset Saving/Resetting(2)
8
Modifying a preset position: For the
pre-programmed preset positions, if a
different position is desired, move the
bed to the desired position
Once the bed is in the desired
position, press and hold the preset
button for 3 seconds. All the Graphic
Display LEDs will blink twice to
indicate that the new position has
been successfully saved.
Resetting a preset to default value: If a user has
re-programmed a preset position and decides that
they would like to revert to the default position,
this can be done simply by pressing both the
preset and the child lock button simultaneously
for 3 seconds. All Graphic Display LEDs will blink
twice to indicate that the preset position has been
successfully returned to the default position.