User's Manual

Manual Actuation
4
Pressing the Up/Down buttons from idle
mode, will move the head(back) actuator
up/down, illuminate the head graphic led,
as well as the articulation selection and
UP/DN buttons’ led.
Articulation Selection
button is pressed to cycle
through the actuation zones
as follows: head -> lumbar -
> foot -> neck -> head ->
etc.
When the desired actuator is
selected, the Up/Down buttons will
move the actuator up and down
while the button is depressed.
When the actuator reaches end of
travel, it will stop moving in that
direction, even if the Up/Down
button is still pressed.