User's Manual

Issue department
：
Bedding Division
Date
：
2021-10-11
Product Function
instruction
Author
：
BenYang
No：MC242
MC242
Version： 1.1
Page 4 of 5
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;
If fails, repeat all the processes above;
1.10. FLAT function
Press and release the FLAT button on remote，the head and foot actuators moves to lower position(when the
actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when
press any buton；
This function takes effect only by pressing the corresponding button on the remote.
1.11. ZERO G position function
Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop
when press any button；
This function takes effect only by pressing the corresponding button on the remote.
4
FCC：
Any C hanges or modifications not e xpressly a pproved b y t he pa rty r esponsible f or c ompliance
could void the user’s authority to operate the equipment.
This de vice c omplies w ith part 15 of the FCC R ules. Operation is s ubject to t he following two
conditions: (1) This d evice may not cause h armful interference, and (2) this device must accep t
any interference received, including interference that may cause undesired operation.