User's Manual

Issue department
：
Bedding Division
Date
：
2021-10-11
Product Function
instruction
Author
：
BenYang
No：MC242
MC242
Version： 1.1
Page 3 of 5
1.3. T I LT and Lumbar MOTOR
Connect to TILT and Lumbar actuator,control by remote single:
Click bed up button，
TILT and Lumbar actuator moves out，stop when released；
Click bed down button，
TILT and Lumbar actuator moves in，stop when released；
This function takes effect only by pressing the corresponding button on the remote.
1.4. Massage
Connect to Foot and Head vibrator,control by remote single:
Click ALL Massage button,
Foot and Head vibrator work,and click again,the strength enhance,there is 3
degree all.
1.5. SYNC port
Connect with the same other Control box or Other accessories;
1.6. Power LED & PAIRING LED
Power supply for control box, PAIRING LED of control box is blue, POWER LED is green。
1.7. Power
Connect to the 29V DC;
1.8. RESET button
Press and hold the RESET button，the Head, Foot actuators will moves to lower position.
1.9. Pair Function
Once power on ，pairing LED turns on，the control box enters into mode of code paring；
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the
remote enters into mode of code paring;
3