User Instructions

Issue department
：
Bedding Division
Date
：
2018-03-26
Product Function
instruction
Author
：
Kyle
No：
MC132
Version： 1.1
Page 3 of 5
3
1.3. Lumbar port
Connect to foot actuator,control by remote single:
Click Lumbar up button，foot actuator moves out，stop when released；
Click Lumbar down button，foot actuator moves in，stop when released；
This function takes effect only by pressing the corresponding button on the remote.
1.4. Massage
Connect to head massage,control by remote:
Click head massage + button,head massage strengthens by one level;
Click head massage - button,head massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
1.5. MULTIFUNCTION port
Connect with the same other Control box or Other accessories;
1.6. Power LED & PAIRING LED
Power supply for control box, PAIRING LED of control box flashes for 4 times,and then turns off, POWER LED turns
on。
1.7. Power
Connect to the 29V DC;
1.8. Pair Function
Power up control box，pairing LED will be flash，the control box enters into mode of code paring；
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the
remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box stop flash, it indicates that
the code paring is successful;